Forum Skoda Superb

Wieczorem.

So, the coding is divided int following sections:
1. Open VAG Helper and choose Superb Combi 2013 from Car selection.
2. Choose the appriopriate BCM output to see the settings:

for example
C4, A26 - LED modules for stop-signal lights

In the default setting You can see the values of the memory cells addresses as following:
3085 - 08
3086 - A1
3087 - 5A

You need to do the same at the rest:
C3, A27 - position lights
3088 - 31
3089 - A1
3090 - 4F


You need to switch over the rear fog lights:
C47 - set to
3073 - 00
3074 - 00
3075 - 3F

A6 - set to

3076 - 40
3077 - A1
3078 - 62

3. Now open Odis Engineering
4. Choose car project SK46 - or if you do not have it, just choose any vW golf 6 based
5. Click on 09-Central electronics
6. Click on Access Authorisation and type password 42013, click OK
7. Click on memory cells
8. Change the address type from HEX to DEC
9. Type first address for example 3085
10. Determine quantity of cells You want to see - You need 3
11. You will see 3 cells displayed in the table
12. Double click on any value
13. Change the HEX values accordingly to Your previous notes in 3 cells
14. Click OK
15. Click "Write Cells", once it's done, particular lights are set-up correctly.
16. Repeat steps 9-16 for the rest of the lamps type.
17. That's it. You have done.

Of course You start with byte 18 to the value of 00 coding.

Enriquez, are u fine, madafaka?:)

Kufa nie chciało mi się tłumaczyć.

Wszystko działa jak należy wielkie dzięki za wsparcie!

Wiecie kto moze mi zakodowac tylne polifty?

Ciężki temat, w kombi chyba łatwiej, ale na razie podjąć walkę z liftbackiem i światłami z polifta do przedlifta podejmie tylko jeden...only one....nie wiem czy mogę zdradzić jego nick...

No ja mam kombi

A skąd jesteś?

Mlawa, polnocne mazowsze ale moge dojechac.

No to zapraszam do Warszawy dnia któregoś po 18... ewentualnie weekendy ale na razie korzystam z lata i weekendy spędzam poza domem...

Ok gra , dasz mi jakis namiar na siebie czy przez forum kontakt?

Poszło na PW