OBD11 - kodowanie

maniek245
Posty: 148
Rejestracja: 18 sie 2019, o 21:24
Samochód: Superb III
Silnik: 2.0TSI (272KM)
Aktualnie: obecnie 380/530

Re: OBD11 - kodowanie

Post autor: maniek245 »

Witam czy ktoś wiej za zrobić adaptację/kalibracje klapy bagaznika w obd11 pro?
maniek245
Posty: 148
Rejestracja: 18 sie 2019, o 21:24
Samochód: Superb III
Silnik: 2.0TSI (272KM)
Aktualnie: obecnie 380/530

Re: OBD11 - kodowanie

Post autor: maniek245 »

Prośba do osób korzystających z liftbacka (limizyny) :) zwal jak zwał z elektryczną klapą bagażnika. I które posiadają obd11 . Bardzo was proszę o backup sterownika 6d jest sterownik pokrywy bagaznika. Mój coś sz z wankuje i chciałbym zrobić porównanie wartosci.



ok czy ktoś mogłby sprawdzić moje wartości w swoim sterowniku i porównać z moimi i ewentualnie wskazać które wartości zmienić ? sterownik 6d----> adaptacje


Backup
Control unit: 6D Deck Lid Control Unit

Long coding:
1008
Adaptations:
Activating and deactivating all development messages:
Activating and deactivating all development messages:
not active
Deactivate production mode:
Deactivate production mode:
Deactivating
Deactivation of tailgate:
Deactivation of tailgate:
not active
Deactivation of tailgate while in trailer operation:
Release button in rear lid handle:
active
Using button to close lock. mechanism in tailgate handle:
active
Button for opening rear lid in luggage compartment:
active
Rear lid lock button in luggage compartment:
active
Sensor for rear lid opening:
active
Remote ctrl, opening with button for tailgate unlock. mechan.:
not active
Remote ctrl, closing with button for tailgate unlock. mechan.:
not active
Opening with button for remote unlocking of tailgate:
not active
Closing with remote unl.button of tailgate when using a trailer:
not active
Using sensor to open tailgate:
not active
Using sensor to close tailgate:
not active
Öffnen mit Taster 2 für Fernentriegelung der Heckklappe:
not active
Schließen m. Taster 2 f. Fernentr. d. Heckkl. b. Anhängerbetr.:
not active
Dectivation of the luggage compartment cover:
Dectivation of the luggage compartment cover:
not active
Detection area upper:
Detection area upper:
20
Luggage compartment cover, adjust. track tolerance:
Luggage compartment cover, adjust. track tolerance:
88
Luggage compartment cover, detection area:
Detection area lower:
30
Detection area upper:
30
Luggage compartment cover, excess limitation in exclusion area:
Luggage compartment cover, excess limitation in exclusion area:
not active
Luggage compartment cover, maximum no. of block drives:
Luggage compartment cover, maximum no. of block drives:
7
Luggage compartment cover, number bloom drives:
Luggage compartment cover, number bloom drives:
100
Luggage compartment cover, reverse path after obstacle recogn.:
Open:
2
Close:
2
Luggage compartment cover, tolerance of the block counter:
Luggage compartment cover, tolerance of the block counter:
20
Minimum opening height of tailgate:
Minimum opening height of tailgate:
1500
Offset for maximum programmable opening stop:
Offset for maximum programmable opening stop:
20
Offset for opening height after basic setting:
Offset for opening height after basic setting:
0
Opening height in production mode:
Opening height in production mode:
60 %
Production mode:
Activation due to excessive pressure on rear lid:
not active
Opening height in production mode:
not active
Opening and closing rear lid:
not active
Tone sensor:
not active
Activation of rear lid with reduced speed:
not active
Calibration:
not active
Checking the rear lid button:
not active
Program opening stop:
Program opening stop:
1864
Tailgate reverse path:
Reverse path when closing:
100
Reverse path when opening:
100
Ausstattungen aktivieren:
Engine 2:
active
Motor 2, sensor system:
active
Tone sensor:
active
Clamping strip 1:
active
Clamping strip 2:
active
Clamping strip 3:
active
Clamping strip 4:
active
Temperature sensor 1:
active
Temperature sensor 2:
active
Closing assist motor:
active
Ostatnio zmieniony 21 sie 2019, o 22:57 przez maniek245, łącznie zmieniany 1 raz.
Awatar użytkownika
Tom-Tdi
Sponsor
Sponsor
Posty: 3353
Rejestracja: 26 kwie 2016, o 00:09
Samochód: Superb III combi 4x4
Silnik: 2.0TSI (280KM)
Aktualnie: 395KM / 515Nm
Lokalizacja: Augsburg

Re: OBD11 - kodowanie

Post autor: Tom-Tdi »

Enriquez pisze:Zapodaj linka. Może se zrobię ten reset.


https://www.skodacommunity.de/threads/t ... st-1381310
pawlo_999
Posty: 6
Rejestracja: 14 cze 2019, o 12:26
Samochód: Superb III 4x4
Silnik: 1.6TDI (120KM)
Imię: Paweł

Re: OBD11 - kodowanie

Post autor: pawlo_999 »

@maniek245 moja kopia możesz sobie porównać

Kod: Zaznacz cały

Long coding: 
        1008
        Vehicle variant: 
            SK481
        Button for closing and locking in the rear lid: 
            not installed
        Subnetwork op.: 
            not active
        Kessy: 
            installed
    Adaptations:
        Program opening stop:
            Program opening stop:
                2029
        Offset for maximum programmable opening stop:
            Offset for maximum programmable opening stop:
                20
        Minimum opening height of tailgate:
            Minimum opening height of tailgate:
                600
        Offset for opening height after basic setting:
            Offset for opening height after basic setting:
                0
        Detection area upper:
            Detection area upper:
                10
        Opening height in production mode:
            Opening height in production mode:
                60 %
        Activating and deactivating all development messages:
            Activating and deactivating all development messages:
                not active
        Deactivate production mode:
            Deactivate production mode:
                Deactivating
        Production mode:
            Activation due to excessive pressure on rear lid:
                not active
            Opening height in production mode:
                not active
            Opening and closing rear lid:
                not active
            Tone sensor:
                not active
            Activation of rear lid with reduced speed:
                not active
            Calibration:
                not active
            Checking the rear lid button:
                not active
        Tailgate reverse path:
            Reverse path when closing:
                7
            Reverse path when opening:
                4
        Deactivation of tailgate:
            Deactivation of tailgate:
                active
        Dectivation of the luggage compartment cover:
            Dectivation of the luggage compartment cover:
                not active
        Deactivation of tailgate while in trailer operation:
            Release button in rear lid handle:
                active
            Using button to close lock. mechanism in tailgate handle:
                active
            Button for opening rear lid in luggage compartment:
                active
            Rear lid lock button in luggage compartment:
                active
            Sensor for rear lid opening:
                active
            Remote ctrl, opening with button for tailgate unlock. mechan.:
                not active
            Remote ctrl, closing with button for tailgate unlock. mechan.:
                not active
            Opening with button for remote unlocking of tailgate:
                not active
            Closing with remote unl.button of tailgate when using a trailer:
                not active
            Using sensor to open tailgate:
                not active
            Using sensor to close tailgate:
                not active
            Öffnen mit Taster 2 für Fernentriegelung der Heckklappe:
                not active
            Schließen m. Taster 2 f. Fernentr. d. Heckkl. b. Anhängerbetr.:
                not active
        Ausstattungen aktivieren:
            Engine 2:
                active
            Motor 2, sensor system:
                active
            Tone sensor:
                active
            Clamping strip 1:
                not active
            Clamping strip 2:
                not active
            Clamping strip 3:
                not active
            Clamping strip 4:
                not active
            Temperature sensor 1:
                active
            Temperature sensor 2:
                active
            Closing assist motor:
                active
        Luggage compartment cover, tolerance of the block counter:
            Luggage compartment cover, tolerance of the block counter:
                0
        Luggage compartment cover, maximum no. of block drives:
            Luggage compartment cover, maximum no. of block drives:
                0
        Luggage compartment cover, reverse path after obstacle recogn.:
            Open:
                0
            Close:
                0
        Luggage compartment cover, detection area:
            Detection area lower:
                0
            Detection area upper:
                0
        Luggage compartment cover, adjust. track tolerance:
            Luggage compartment cover, adjust. track tolerance:
                0
        Luggage compartment cover, number bloom drives:
            Luggage compartment cover, number bloom drives:
                0
        Luggage compartment cover, excess limitation in exclusion area:
            Luggage compartment cover, excess limitation in exclusion area:
                not active
        Control module switch-off, switch-off time:
            Control module:
                0 min
            Data bus:
                4 min
pawlo_999
Posty: 6
Rejestracja: 14 cze 2019, o 12:26
Samochód: Superb III 4x4
Silnik: 1.6TDI (120KM)
Imię: Paweł

Re: OBD11 - kodowanie

Post autor: pawlo_999 »

Czy ktoś mógłby spróbować poniższe kodowania dać znać czy działają i czy jest jakaś różnica ?

Włączenie podświetlenia ambiente zależnego od profilu jazdy Sport, Eco itd

Kod: Zaznacz cały

Module 19 Gateway
Security Access > 20103
Long Coding (Text mode) - FPA_Funktion_AMB -> active (Byte 11 Bit 7) NIE MA CHYBA

Module 09 (Central Electrics)
Security access -> 31347
Adaptation
Submenu - Int. Light, 2nd generation
- Ambiente_Farbwahl_FPA_waehlbare_Kopplung -> active (Default not active)
- Ambiente_Farbwahl_Individual -> 1 (Default 7)
- Ambiente_Farbwahl_FPA_waehlbare_Kopplung_Status_hmi_default -> coupled (Default active)
- Instrumententafelbeleuchtung mehrfarbig -> active

Submenu - Ambientelicht Zuordnung der Farbe zum Fahrprofil
- Fahrprofil_0: 5 - Coming/leaving home (door open and car off) 
- Fahrprofil_1: 1 - Comfort
- Fahrprofil_2: 3 - Normal
- Fahrprofil_3: 4 - Sport
- Fahrprofil_5: 9 - Eco
- Fahrprofil_7: 7 - Individual 
- Ambiente: Sollspannungsanforderung 13,5V (Default: Keine_Spannungsanforderung)
 
Submenu - Interior light, light configuration
- Ambientemenue mit globalem aus -> active
- Ambientemenue mit alle Zonen -> active
- Ambient_Farbliste_HMI -> active
Lane assist włączony ciut wcześniej mniej odbija się od pasów

Kod: Zaznacz cały

Long coding
    Control unit: A5 Front Sensors Driver Assistance System
    Values: 
        Point_of_intervention: 
            Old value: late
            New value: early (można włączyć setting via menu wtedy pojawi się Adaptacyjne prowadzenie w menu)
Dodanie do Lane assist podążania za samochodem przed gdy nie ma linii

Kod: Zaznacz cały

Long coding
    Control unit: 13 Adaptive Cruise Control
        Traffic_jam_dependent_linear_tracking:
            Old value: Deactivated
            New value: activated
Dodanie pseudo Predictive ACC(uwzględnienie trasy ograniczeń prędkości) u mnie kompletnie nie działa pojawia się tylko w opcjach

Kod: Zaznacz cały

Long coding
    Control unit: 13 Adaptive Cruise Control
        Speed_limit_assistent:
            Old value: Deactivated
            New value: activated
        Curve_assistent:
            Old value: Deactivated
            New value: activated
Pedestrian protection pojawia się w menu można nawet spróbować aktywować ale u mnie bez powodzenia prawdopodobnie brakuje kodowania Gateway

Kod: Zaznacz cały

Long coding
    Control unit: 13 Adaptive Cruise Control
        Pedestrian_protection:
            Old value: Deactivated
            New value: activated
        Pedestrian_protection_advance_warning: Nie dziala
            Old value: Deactivated
            New value: activated

Long coding
    Control unit: 17 Dash Board
        Pedestrian protection, BAP distance:
            Old value: No
            New value: Yes

Adaptation
    Control unit: 5F Information Control Unit
    Name: Car_Function_List_BAP_Gen2
        Pedestrian_Assist_0x3A:
            Old value: Not activated
            New value: activated
    Name: Car_Function_Adaptations_Gen2
        menu_display_Pedestrian_Assist:
            Old value: Not activated
            New value: activated
Lane change assist musi działać Lane assist

Kod: Zaznacz cały

Long coding
    Control unit: 13 Adaptive Cruise Control
        Lane_change_support:
            Old value: Deactivated
            New value: activated

Long coding
    Control unit: 17 Dash Board
        Lane change assistance:
            Old value: No
            New value: Yes
Awatar użytkownika
Enriquez
Administrator
Posty: 13584
Rejestracja: 2 cze 2012, o 09:20
Samochód: Inny
Rocznik: 2022
Silnik: Inny
Imię: Marcin
Lokalizacja: Łódź - Wieś ELW

Re: OBD11 - kodowanie

Post autor: Enriquez »

W którym roczniku może to zadziałać?
Pozdrawiam
Marcin
---
Nie udzielam porad technicznych na PW. Nie podejmuję się wykonywania żadnych modyfikacji w cudzych samochodach. Proszę mnie o to nie pytać.
daro
Posty: 518
Rejestracja: 20 sie 2015, o 19:56
Samochód: Superb III
Rocznik: 2019
Silnik: 2.0TSI (272KM)
Lokalizacja: Kraków

Re: OBD11 - kodowanie

Post autor: daro »

pewnie MY2020 :P
maniek245
Posty: 148
Rejestracja: 18 sie 2019, o 21:24
Samochód: Superb III
Silnik: 2.0TSI (272KM)
Aktualnie: obecnie 380/530

Re: OBD11 - kodowanie

Post autor: maniek245 »

pawlo_999 pisze:Czy ktoś mógłby spróbować poniższe kodowania dać znać czy działają i czy jest jakaś różnica ?

Włączenie podświetlenia ambiente zależnego od profilu jazdy Sport, Eco itd

Kod: Zaznacz cały

Module 19 Gateway
Security Access > 20103
Long Coding (Text mode) - FPA_Funktion_AMB -> active (Byte 11 Bit 7) NIE MA CHYBA

Module 09 (Central Electrics)
Security access -> 31347
Adaptation
Submenu - Int. Light, 2nd generation
- Ambiente_Farbwahl_FPA_waehlbare_Kopplung -> active (Default not active)
- Ambiente_Farbwahl_Individual -> 1 (Default 7)
- Ambiente_Farbwahl_FPA_waehlbare_Kopplung_Status_hmi_default -> coupled (Default active)
- Instrumententafelbeleuchtung mehrfarbig -> active

Submenu - Ambientelicht Zuordnung der Farbe zum Fahrprofil
- Fahrprofil_0: 5 - Coming/leaving home (door open and car off) 
- Fahrprofil_1: 1 - Comfort
- Fahrprofil_2: 3 - Normal
- Fahrprofil_3: 4 - Sport
- Fahrprofil_5: 9 - Eco
- Fahrprofil_7: 7 - Individual 
- Ambiente: Sollspannungsanforderung 13,5V (Default: Keine_Spannungsanforderung)
 
Submenu - Interior light, light configuration
- Ambientemenue mit globalem aus -> active
- Ambientemenue mit alle Zonen -> active
- Ambient_Farbliste_HMI -> active
Lane assist włączony ciut wcześniej mniej odbija się od pasów

Kod: Zaznacz cały

Long coding
    Control unit: A5 Front Sensors Driver Assistance System
    Values: 
        Point_of_intervention: 
            Old value: late
            New value: early (można włączyć setting via menu wtedy pojawi się Adaptacyjne prowadzenie w menu)
Dodanie do Lane assist podążania za samochodem przed gdy nie ma linii

Kod: Zaznacz cały

Long coding
    Control unit: 13 Adaptive Cruise Control
        Traffic_jam_dependent_linear_tracking:
            Old value: Deactivated
            New value: activated
Dodanie pseudo Predictive ACC(uwzględnienie trasy ograniczeń prędkości) u mnie kompletnie nie działa pojawia się tylko w opcjach

Kod: Zaznacz cały

Long coding
    Control unit: 13 Adaptive Cruise Control
        Speed_limit_assistent:
            Old value: Deactivated
            New value: activated
        Curve_assistent:
            Old value: Deactivated
            New value: activated
Pedestrian protection pojawia się w menu można nawet spróbować aktywować ale u mnie bez powodzenia prawdopodobnie brakuje kodowania Gateway

Kod: Zaznacz cały

Long coding
    Control unit: 13 Adaptive Cruise Control
        Pedestrian_protection:
            Old value: Deactivated
            New value: activated
        Pedestrian_protection_advance_warning: Nie dziala
            Old value: Deactivated
            New value: activated

Long coding
    Control unit: 17 Dash Board
        Pedestrian protection, BAP distance:
            Old value: No
            New value: Yes

Adaptation
    Control unit: 5F Information Control Unit
    Name: Car_Function_List_BAP_Gen2
        Pedestrian_Assist_0x3A:
            Old value: Not activated
            New value: activated
    Name: Car_Function_Adaptations_Gen2
        menu_display_Pedestrian_Assist:
            Old value: Not activated
            New value: activated
Lane change assist musi działać Lane assist

Kod: Zaznacz cały

Long coding
    Control unit: 13 Adaptive Cruise Control
        Lane_change_support:
            Old value: Deactivated
            New value: activated

Long coding
    Control unit: 17 Dash Board
        Lane change assistance:
            Old value: No
            New value: Yes

Pawlo_999 dzięki za zainteresowanie tematem , dzięki twoim nastawom udało się dogadać z moją pokrywą :) Wielkie dzięki za pomoc . biore kodowania które podałeś, sprawdzę `i dam znać.
Awatar użytkownika
Tom-Tdi
Sponsor
Sponsor
Posty: 3353
Rejestracja: 26 kwie 2016, o 00:09
Samochód: Superb III combi 4x4
Silnik: 2.0TSI (280KM)
Aktualnie: 395KM / 515Nm
Lokalizacja: Augsburg

Re: OBD11 - kodowanie

Post autor: Tom-Tdi »

Testujcie chłopaki i dajcie znać.
Awatar użytkownika
piramida
Doradca
Posty: 4011
Rejestracja: 12 sie 2012, o 12:21
Samochód: Superb III combi 4x4
Rocznik: 2016
Silnik: 2.0TSI (280KM)
Aktualnie: 480bhp/570Nm
Imię: Piotr
Lokalizacja: Kraków

Re: OBD11 - kodowanie

Post autor: piramida »

Po obniżeniu zawieszenia i adaptacji, zawias lepiej pracuje i już tak nie dobija?
maniek245
Posty: 148
Rejestracja: 18 sie 2019, o 21:24
Samochód: Superb III
Silnik: 2.0TSI (272KM)
Aktualnie: obecnie 380/530

Re: OBD11 - kodowanie

Post autor: maniek245 »

pawlo_999 pisze:Czy ktoś mógłby spróbować poniższe kodowania dać znać czy działają i czy jest jakaś różnica ?

Włączenie podświetlenia ambiente zależnego od profilu jazdy Sport, Eco itd

Kod: Zaznacz cały

Module 19 Gateway
Security Access > 20103
Long Coding (Text mode) - FPA_Funktion_AMB -> active (Byte 11 Bit 7) NIE MA CHYBA

Module 09 (Central Electrics)
Security access -> 31347
Adaptation
Submenu - Int. Light, 2nd generation
- Ambiente_Farbwahl_FPA_waehlbare_Kopplung -> active (Default not active)
- Ambiente_Farbwahl_Individual -> 1 (Default 7)
- Ambiente_Farbwahl_FPA_waehlbare_Kopplung_Status_hmi_default -> coupled (Default active)
- Instrumententafelbeleuchtung mehrfarbig -> active

Submenu - Ambientelicht Zuordnung der Farbe zum Fahrprofil
- Fahrprofil_0: 5 - Coming/leaving home (door open and car off) 
- Fahrprofil_1: 1 - Comfort
- Fahrprofil_2: 3 - Normal
- Fahrprofil_3: 4 - Sport
- Fahrprofil_5: 9 - Eco
- Fahrprofil_7: 7 - Individual 
- Ambiente: Sollspannungsanforderung 13,5V (Default: Keine_Spannungsanforderung)
 
Submenu - Interior light, light configuration
- Ambientemenue mit globalem aus -> active
- Ambientemenue mit alle Zonen -> active
- Ambient_Farbliste_HMI -> active
Lane assist włączony ciut wcześniej mniej odbija się od pasów

Kod: Zaznacz cały

Long coding
    Control unit: A5 Front Sensors Driver Assistance System
    Values: 
        Point_of_intervention: 
            Old value: late
            New value: early (można włączyć setting via menu wtedy pojawi się Adaptacyjne prowadzenie w menu)
Dodanie do Lane assist podążania za samochodem przed gdy nie ma linii

Kod: Zaznacz cały

Long coding
    Control unit: 13 Adaptive Cruise Control
        Traffic_jam_dependent_linear_tracking:
            Old value: Deactivated
            New value: activated
Dodanie pseudo Predictive ACC(uwzględnienie trasy ograniczeń prędkości) u mnie kompletnie nie działa pojawia się tylko w opcjach

Kod: Zaznacz cały

Long coding
    Control unit: 13 Adaptive Cruise Control
        Speed_limit_assistent:
            Old value: Deactivated
            New value: activated
        Curve_assistent:
            Old value: Deactivated
            New value: activated
Pedestrian protection pojawia się w menu można nawet spróbować aktywować ale u mnie bez powodzenia prawdopodobnie brakuje kodowania Gateway

Kod: Zaznacz cały

Long coding
    Control unit: 13 Adaptive Cruise Control
        Pedestrian_protection:
            Old value: Deactivated
            New value: activated
        Pedestrian_protection_advance_warning: Nie dziala
            Old value: Deactivated
            New value: activated

Long coding
    Control unit: 17 Dash Board
        Pedestrian protection, BAP distance:
            Old value: No
            New value: Yes

Adaptation
    Control unit: 5F Information Control Unit
    Name: Car_Function_List_BAP_Gen2
        Pedestrian_Assist_0x3A:
            Old value: Not activated
            New value: activated
    Name: Car_Function_Adaptations_Gen2
        menu_display_Pedestrian_Assist:
            Old value: Not activated
            New value: activated
Lane change assist musi działać Lane assist

Kod: Zaznacz cały

Long coding
    Control unit: 13 Adaptive Cruise Control
        Lane_change_support:
            Old value: Deactivated
            New value: activated

Long coding
    Control unit: 17 Dash Board
        Lane change assistance:
            Old value: No
            New value: Yes
Witam podświetlenie ambitne. Po kodowaniu nic się nie zmienia, kolor bez zmian. Lenaasist po aktywowaniu zaczyna mrugać radio . Może dlatego że nie mam adaptacyjnego temp. Tylko zwykły?
zuz9
Posty: 48
Rejestracja: 24 lip 2019, o 07:51
Samochód: Superb III combi 4x4
Silnik: Inny
Imię: Adrian

Re: OBD11 - kodowanie

Post autor: zuz9 »

Panowie, wybaczcie bo pewnie padło już takie pytanie, jak podchodzi do tego serwis? Nie ma problemów z gwarancją?
Awatar użytkownika
Elninjo
Posty: 692
Rejestracja: 23 sie 2016, o 08:06
Samochód: Inny
Silnik: 2.0TDI (190KM)
Aktualnie: 240 / 430
Imię: DarYush
Kontakt:

Re: OBD11 - kodowanie

Post autor: Elninjo »

Nie nie problemów z gwarancją...

Wysłane z mojego SM-G950F przy użyciu Tapatalka
zuz9
Posty: 48
Rejestracja: 24 lip 2019, o 07:51
Samochód: Superb III combi 4x4
Silnik: Inny
Imię: Adrian

Re: OBD11 - kodowanie

Post autor: zuz9 »

Dzięki, ktoś z forum tym handluje, żeby wziąć od swojego?
szarik
Posty: 61
Rejestracja: 16 lis 2016, o 19:21
Samochód: Inny
Silnik: Inny
Lokalizacja: Miasto Królów Polski

Re: OBD11 - kodowanie

Post autor: szarik »

zuz9 pisze:Dzięki, ktoś z forum tym handluje, żeby wziąć od swojego?
Eldar

Natapane z szarik Samsung S8
ODPOWIEDZ